Your newest purchase

Where goats go to escape
User avatar
fishfoodie
Posts: 8222
Joined: Mon Jun 29, 2020 8:25 pm

Wylie Coyote wrote: Wed Aug 18, 2021 4:58 pm
inactionman wrote: Wed Aug 18, 2021 12:08 pm I am inches - inches -away from buying a knackered 1990s Land Rover Defender.

Please talk me out of this idiotic notion.

(I realise they're massively impractical unless you're a farmer, but I've always wanted one)
I have '99 TD5 90 and absolutely love it. Not my daily driver but I can't see myself ever letting it go. A good chassis is the main thing, replacing that (as I did with a galvanised one) is a killer but once you've done that (maybe the bulkhead too) you are set.
Then just convert it to a fuel source that isn't going to bankrupt you in five years time; just for owning it; & you're done ....
Dinsdale Piranha
Posts: 1010
Joined: Mon Jun 29, 2020 10:08 pm

inactionman wrote: Wed Aug 18, 2021 12:08 pm I am inches - inches -away from buying a knackered 1990s Land Rover Defender.

Please talk me out of this idiotic notion.

(I realise they're massively impractical unless you're a farmer, but I've always wanted one)
Do it! ( a friend just bought this)

Image
Wylie Coyote
Posts: 80
Joined: Tue Jun 30, 2020 8:59 am

fishfoodie wrote: Wed Aug 18, 2021 5:13 pm
Wylie Coyote wrote: Wed Aug 18, 2021 4:58 pm
inactionman wrote: Wed Aug 18, 2021 12:08 pm I am inches - inches -away from buying a knackered 1990s Land Rover Defender.

Please talk me out of this idiotic notion.

(I realise they're massively impractical unless you're a farmer, but I've always wanted one)
I have '99 TD5 90 and absolutely love it. Not my daily driver but I can't see myself ever letting it go. A good chassis is the main thing, replacing that (as I did with a galvanised one) is a killer but once you've done that (maybe the bulkhead too) you are set.
Then just convert it to a fuel source that isn't going to bankrupt you in five years time; just for owning it; & you're done ....
There's already some folks who've done that, don't dismiss the ingenuity of the defender community! (5 years is a bit exaggerated too).
Dogbert
Posts: 703
Joined: Sun Jul 12, 2020 7:32 am

inactionman wrote: Wed Aug 18, 2021 12:08 pm I am inches - inches -away from buying a knackered 1990s Land Rover Defender.

Please talk me out of this idiotic notion.

(I realise they're massively impractical unless you're a farmer, but I've always wanted one)
So either a late TDI 200 or early TDI300 - We currently have a 1992 TDi 200

If you do buy one , congratulations , you have just paid the Uni fees for the children of the owner of your local landy garage.
People always say chassis or bulkhead , and yeah that's important , but you need to consider a lot , lot more , what you are looking to buy is 30 years old

So what could go wrong , its just a ball hair away from a tractor - right , well that's true , its noisy , I mean really noisy , headache inducing noisy , and no matter what sound proofing , its still fucking noisy

The engines are actually pretty bulletproof , - if you change the oil every 6000m , and everyone does that

Front axles , rear axles could be shot , Transfer box , gearbox , diffs high pressure fuel valves - iIve replaced all of those
although the rear axle we got was off a Disco with disc brakes , but at least she stops pretty well
Steering box and dampers , fuel tanks, I could go on ( and on , and on )

It's a bit like painting the Forth road Bridge - you think nothing else will fail - until it does

Saying that we all love her , and shes a member of the family so will never get rid

Just prepare for the constant - and I do mean constant bills and large bills

Learn to weld

Learn that getting parts is not as easy as you think , often better to get what you have rebuilt ( like a high pressure fuel pump )

Get a decent pedal box ( and tracker ) because at some stage some bastard will try to steal it

One of the best things was to add a head unit with a rear view camera - which was dead easy , until you find out a previous owner had been buggering about with the wiring loom

Other than that go for it - for all the times you swear at it , you will still love it ( I'm mad - my other car is an Alfa !)

My next weekend is to repair the rotten door sills ( welding again ) assuming my tinnitus isn't too bad - did I mention they are fucking noisy

If you have any questions, other than the phone number of a good psychiatrist - just let me know
Lager & Lime - we don't do cocktails
User avatar
SaintK
Posts: 6620
Joined: Tue Jun 30, 2020 7:49 am
Location: Over there somewhere

Dogbert wrote: Wed Aug 18, 2021 9:26 pm
inactionman wrote: Wed Aug 18, 2021 12:08 pm I am inches - inches -away from buying a knackered 1990s Land Rover Defender.

Please talk me out of this idiotic notion.

(I realise they're massively impractical unless you're a farmer, but I've always wanted one)
So either a late TDI 200 or early TDI300 - We currently have a 1992 TDi 200

If you do buy one , congratulations , you have just paid the Uni fees for the children of the owner of your local landy garage.
People always say chassis or bulkhead , and yeah that's important , but you need to consider a lot , lot more , what you are looking to buy is 30 years old

So what could go wrong , its just a ball hair away from a tractor - right , well that's true , its noisy , I mean really noisy , headache inducing noisy , and no matter what sound proofing , its still fucking noisy

The engines are actually pretty bulletproof , - if you change the oil every 6000m , and everyone does that

Front axles , rear axles could be shot , Transfer box , gearbox , diffs high pressure fuel valves - iIve replaced all of those
although the rear axle we got was off a Disco with disc brakes , but at least she stops pretty well
Steering box and dampers , fuel tanks, I could go on ( and on , and on )

It's a bit like painting the Forth road Bridge - you think nothing else will fail - until it does

Saying that we all love her , and shes a member of the family so will never get rid

Just prepare for the constant - and I do mean constant bills and large bills

Learn to weld

Learn that getting parts is not as easy as you think , often better to get what you have rebuilt ( like a high pressure fuel pump )

Get a decent pedal box ( and tracker ) because at some stage some bastard will try to steal it

One of the best things was to add a head unit with a rear view camera - which was dead easy , until you find out a previous owner had been buggering about with the wiring loom

Other than that go for it - for all the times you swear at it , you will still love it ( I'm mad - my other car is an Alfa !)

My next weekend is to repair the rotten door sills ( welding again ) assuming my tinnitus isn't too bad - did I mention they are fucking noisy

If you have any questions, other than the phone number of a good psychiatrist - just let me know
Post of the year :thumbup: :thumbup: :thumbup:
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

inactionman wrote: Wed Aug 18, 2021 12:08 pm
Please talk me out of this idiotic notion.
Dogbert wrote: Wed Aug 18, 2021 9:26 pm
So either a late TDI 200 or early TDI300 - We currently have a 1992 TDi 200

If you do buy one , congratulations , you have just paid the Uni fees for the children of the owner of your local landy garage.
People always say chassis or bulkhead , and yeah that's important , but you need to consider a lot , lot more , what you are looking to buy is 30 years old

So what could go wrong , its just a ball hair away from a tractor - right , well that's true , its noisy , I mean really noisy , headache inducing noisy , and no matter what sound proofing , its still fucking noisy

The engines are actually pretty bulletproof , - if you change the oil every 6000m , and everyone does that

Front axles , rear axles could be shot , Transfer box , gearbox , diffs high pressure fuel valves - iIve replaced all of those
although the rear axle we got was off a Disco with disc brakes , but at least she stops pretty well
Steering box and dampers , fuel tanks, I could go on ( and on , and on )

It's a bit like painting the Forth road Bridge - you think nothing else will fail - until it does

Saying that we all love her , and shes a member of the family so will never get rid

Just prepare for the constant - and I do mean constant bills and large bills

Learn to weld

Learn that getting parts is not as easy as you think , often better to get what you have rebuilt ( like a high pressure fuel pump )

Get a decent pedal box ( and tracker ) because at some stage some bastard will try to steal it

One of the best things was to add a head unit with a rear view camera - which was dead easy , until you find out a previous owner had been buggering about with the wiring loom

Other than that go for it - for all the times you swear at it , you will still love it ( I'm mad - my other car is an Alfa !)

My next weekend is to repair the rotten door sills ( welding again ) assuming my tinnitus isn't too bad - did I mention they are fucking noisy

If you have any questions, other than the phone number of a good psychiatrist - just let me know
:grin:
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

So, if I were to follow this idiotic idea through, is there actually a model year/version that would avoid the worst of the problems without breaking bank (recognising that I'm happy to spend money annually but can't stump up £20k for a recent model)?

Is there a way to know what cars have had galvanised crossmembers/chassis, and any things that I should avoid (e.g. certain age/mileage that haven't had certain bits replaced)?

I should just join a land rover forum, but they'd never talk me out of it.

It gets worse btw - I'd need to fit 2 kiddie seats (3 and 4 years old) which is likely to be a contortion, utterly stupid but very great fun for me and the kids. Was a a bit worried about crash safety but it's a fucking tank and we'd not exactly be speeding in the thing. Was looking at getting the centre front seat and having them both up with me - I'm quite tall so getting a 10 would help with leg room but think it'll end up a 90, if it happens.

The more I write the more stupid it sounds. I didn't thin my midlife crisis would involve what is essentially farm machinery.
Wylie Coyote
Posts: 80
Joined: Tue Jun 30, 2020 8:59 am

inactionman wrote: Wed Aug 18, 2021 10:25 pm So, if I were to follow this idiotic idea through, is there actually a model year/version that would avoid the worst of the problems without breaking bank (recognising that I'm happy to spend money annually but can't stump up £20k for a recent model)?

Is there a way to know what cars have had galvanised crossmembers/chassis, and any things that I should avoid (e.g. certain age/mileage that haven't had certain bits replaced)?

I should just join a land rover forum, but they'd never talk me out of it.

It gets worse btw - I'd need to fit 2 kiddie seats (3 and 4 years old) which is likely to be a contortion, utterly stupid but very great fun for me and the kids. Was a a bit worried about crash safety but it's a fucking tank and we'd not exactly be speeding in the thing. Was looking at getting the centre front seat and having them both up with me - I'm quite tall so getting a 10 would help with leg room but think it'll end up a 90, if it happens.

The more I write the more stupid it sounds. I didn't thin my midlife crisis would involve what is essentially farm machinery.
A late 90s 300TDi on a galvanised chassis (it's the first thing folks mention in their advert) would be a good start. I have 3 kids around your age, I'm a bit wary of long drives with them in the front as safety wise it wouldn't match a new car with airbags etc, but you're right you'll be moving pretty slowly. I have a 90 hardtop, but have a friend with a 12 seat 300 tdi 110 station wagon. With it's roofrack, towing capacity and off-road ability you'd be hard pressed to find a more versatile machine than one of those.
User avatar
Sandstorm
Posts: 10884
Joined: Mon Jun 29, 2020 7:05 pm
Location: England

Go back a page and see the smart bloke who bought the old Isuzu instead.
User avatar
clydecloggie
Posts: 1198
Joined: Tue Jun 30, 2020 6:31 am

Sandstorm wrote: Thu Aug 19, 2021 8:37 am Go back a page and see the smart bloke who bought the old Isuzu instead.
I was just going to say...why not go for a '90s Land Cruiser instead for the exact same feel without the bankruptcy?
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

clydecloggie wrote: Thu Aug 19, 2021 9:40 am
Sandstorm wrote: Thu Aug 19, 2021 8:37 am Go back a page and see the smart bloke who bought the old Isuzu instead.
I was just going to say...why not go for a '90s Land Cruiser instead for the exact same feel without the bankruptcy?
It doesn't have the same character.

By which I mean it isn't a noisy, bad-mannered cantankerous old sod who will pack up in a huff every ten minutes.
colonel
Posts: 19
Joined: Thu Jul 02, 2020 7:38 am

Have changed shape since the beginning of the Pandemic, I expect this to be the first of a very expensive re-wardrobing


Image
Dogbert
Posts: 703
Joined: Sun Jul 12, 2020 7:32 am

Well you could buy a an old Land Cruiser , or Isuzu , and they are probably much better cars - but that is not the point

If you buy an old Landy , you will be the coolest dad going as far as the kids are concerned ( my son learnt to drive on ours )

Did you see Elsa the Lion on a Land Cruiser , or the Hulk sitting on the back of an Isuzu, did Steve McQueen drive a Rav4 , Will other Jeep owners give you a wave as you pass them ?
When your sitting on your Isuzu and see a Landy go past - will you regret not buying the Landy ( The answer is yes )

( you do not wave a new defenders )

Owning a Landy is a bit like joining a cult - its madness , but only Landy owners understand - at some point you will end up discussing with some random stranger in Sainburys car park the benefits of a 24 spline diff compared to a 10 spline diff

Should you buy one - no , if you do your mad - didn't stop me though

If you can get a decent one with a recent Galvi Chassis - it will probably save you money in the long run , but just because they get advertised as having a Galvi Chassis , doesn't mean that it will be sound , or even that there is much of the Galvanization still left.

I personally think that the TDI 200 is the better engine , mated with the LT77 gearbox , but the 300 is fine too.

Just go in with your eyes ( and wallet ) wide open , Do your research , find a local independent landie garage , if you can , see if they know of anything for sale

If you find one without a bundle of invoices / Service histories that would put war and peace to shame , them it will be you who will be spending the money

Oh yeah roof racks are great - but even on a bricked shaped car you would think that you have a hole in your fuel tank , and don't even think about multi storied car parks

Life is too short what have you got to loose ( part from your savings / marriage etc )

Oh yeah did I mention how fucking noisy they are

If you do take the plunge stick some pics up
Lager & Lime - we don't do cocktails
Slick
Posts: 11913
Joined: Tue Jun 30, 2020 2:58 pm

Post of the year :thumbup: :thumbup:
Yup, a definate contender!
All the money you made will never buy back your soul
Wylie Coyote
Posts: 80
Joined: Tue Jun 30, 2020 8:59 am

clydecloggie wrote: Thu Aug 19, 2021 9:40 am
Sandstorm wrote: Thu Aug 19, 2021 8:37 am Go back a page and see the smart bloke who bought the old Isuzu instead.
I was just going to say...why not go for a '90s Land Cruiser instead for the exact same feel without the bankruptcy?
They are extremely rare in the UK, I think I see one on Autotrader for instance. IIRC Most Toyota Landcruisers in the UK aren't real Landcruisers like you get in Australia, they're rebadged Toyota Prados. Ultimately a 20 year car of any brand is going to require regular maintenance.
User avatar
clydecloggie
Posts: 1198
Joined: Tue Jun 30, 2020 6:31 am

Wylie Coyote wrote: Fri Aug 20, 2021 9:52 am
clydecloggie wrote: Thu Aug 19, 2021 9:40 am
Sandstorm wrote: Thu Aug 19, 2021 8:37 am Go back a page and see the smart bloke who bought the old Isuzu instead.
I was just going to say...why not go for a '90s Land Cruiser instead for the exact same feel without the bankruptcy?
They are extremely rare in the UK, I think I see one on Autotrader for instance. IIRC Most Toyota Landcruisers in the UK aren't real Landcruisers like you get in Australia, they're rebadged Toyota Prados. Ultimately a 20 year car of any brand is going to require regular maintenance.
Once you get up to the Pecuniocratic United Estates of Grouse Shooting (or what Visit Scotland unimaginatively calls the 'Highlands'), there are plenty old Cruisers on show. Still dwarfed by the numbers of broken-dwon Land Rovers of course...
User avatar
TB63
Posts: 4013
Joined: Mon Jun 29, 2020 9:11 pm
Location: Tinopolis

Old friend of mine runs a 4 by 4 garage specialising in LR, also races MGBGT V8s, after totalling (again) his race car, decided he needed a new engine so slapped his old racing V8 into a 1990s 90 inch, plus lots of mods...
Took it out for a spin...
Comfort level.. chiropractor.
Acceleration...not bad, didn't need a calender for 0 to 60.
Noise.. "WHAT, SPEAK UP".
Handling... :lol:
Torque..Yes..

Verdict, great fun, looked lovely, would climb a brick wall but at 10mpg........
User avatar
TB63
Posts: 4013
Joined: Mon Jun 29, 2020 9:11 pm
Location: Tinopolis

Old friend of mine runs a 4 by 4 garage specialising in LR, also races MGBGT V8s, after totalling (again) his race car, decided he needed a new engine so slapped his old racing V8 into a 1990s 90 inch, plus lots of mods...
Took it out for a spin...
Comfort level.. chiropractor.
Acceleration...not bad, didn't need a calender for 0 to 60.
Noise.. "WHAT, SPEAK UP".
Handling... :lol:
Torque..Yes..

Verdict, great fun, looked lovely, would climb a brick wall but at 10mpg........
User avatar
Globus
Posts: 1844
Joined: Thu Sep 03, 2020 10:03 am

TB63 wrote: Fri Aug 20, 2021 11:20 am Old friend of mine runs a 4 by 4 garage specialising in LR, also races MGBGT V8s, after totalling (again) his race car, decided he needed a new engine so slapped his old racing V8 into a 1990s 90 inch, plus lots of mods...
Took it out for a spin...
Comfort level.. chiropractor.
Acceleration...not bad, didn't need a calender for 0 to 60.
Noise.. "WHAT, SPEAK UP".
Handling... :lol:
Torque..Yes..

Verdict, great fun, looked lovely, would climb a brick wall but at 10mpg........
My schoolmate had one and we disappeared into a ditch down Marsdon Lane in Norwich.

Two gals in the back. Nobody was injured, thank the Lord.


Edit. It was an MGBTC.
User avatar
Globus
Posts: 1844
Joined: Thu Sep 03, 2020 10:03 am

Image
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

Globus wrote: Fri Aug 20, 2021 12:05 pm Image
I've got the same chair, so much better than any other I've tried.

(for the tightwads amongst us, these go for well over a grand new but you can get ones from office clearance companies for about £300, we got my wife one during lockdown and it was brand new, still with labels. It's a Hemran Millar Aeron for anyone interested.)
User avatar
Globus
Posts: 1844
Joined: Thu Sep 03, 2020 10:03 am

I knew the owner of this company when I lived around the corner.
https://www.insurancebook.co.uk/busines ... e-services

His wife gave birth to a son at the bottom of their house stairs.

Pretty frantic all round as I had to go to his workplace to tell him junior was on its way.

Got there just in time. Broke the speed limit a bit! It was in my late lamented Porsche.
User avatar
Marylandolorian
Posts: 1247
Joined: Thu Jul 02, 2020 2:47 pm
Location: Amerikanuak

Sards wrote: Sun Aug 15, 2021 6:19 am
sorCrer wrote: Fri Aug 06, 2021 9:02 am
Marylandolorian wrote: Thu Aug 05, 2021 8:49 pm Image
:thumbup:
I am looking for a decent pair for my eldest. His last pair tore just before winter arrived. He has this habit of standing on the tips to get height to look for wave. He also needs a new board too.
How old is he or more important his size ( weight/tall)? How big are the waves?

I don’t use boards but it looks like Morey still popular with the fair/good bodyboarders
Dinsdale Piranha
Posts: 1010
Joined: Mon Jun 29, 2020 10:08 pm

inactionman wrote: Fri Aug 20, 2021 12:09 pm
Globus wrote: Fri Aug 20, 2021 12:05 pm Image
I've got the same chair, so much better than any other I've tried.

(for the tightwads amongst us, these go for well over a grand new but you can get ones from office clearance companies for about £300, we got my wife one during lockdown and it was brand new, still with labels. It's a Hemran Millar Aeron for anyone interested.)
Personally, I paid extra for the executive version.

Best chair I have had.
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

The Defender I had eyes on looked too much work so that's been binned, but will keep eyes peeled.

As some recompense, the missus signed off on a trail camera we can use for the hedgehog house we just built for the kids.

The hedgehog house itself is a simple wood and slatted roof cheapie from Dobbies, I nailed some boards underneath to give it a base and used bricks to make a tunnel to keep foxes etc away from the entrance.

The trail camera looks a decent bit of kit, can't wait to give it a go - bought it from naturespy, a non-profit who do loads of this stuff around the world.

Image

https://shop.naturespy.org/product/brow ... tc-7e-hp4/
User avatar
ASMO
Posts: 5423
Joined: Mon Jun 29, 2020 6:08 pm

LG C1 65 inch 4K TV and the Samsung HW Q950A surround sound system to go with it, arriving tomorrow, cant wait! :-)
User avatar
FalseBayFC
Posts: 3554
Joined: Sun Aug 30, 2020 3:19 pm

inactionman wrote: Mon Sep 27, 2021 10:33 am The Defender I had eyes on looked too much work so that's been binned, but will keep eyes peeled.

As some recompense, the missus signed off on a trail camera we can use for the hedgehog house we just built for the kids.

The hedgehog house itself is a simple wood and slatted roof cheapie from Dobbies, I nailed some boards underneath to give it a base and used bricks to make a tunnel to keep foxes etc away from the entrance.

The trail camera looks a decent bit of kit, can't wait to give it a go - bought it from naturespy, a non-profit who do loads of this stuff around the world.

Image

https://shop.naturespy.org/product/brow ... tc-7e-hp4/
We use those trail cams to keep track of porcupines and bushpigs on our KZN farms. Amazing what crops up on them. The Pietermaritzburg university guys visits regularly to download the data. On one of the farms where Eland ( a huge antelope ) hadn't been seen for 50 years, a couple of them sauntered through and got captured.
Mr Tim Buktoo
Posts: 112
Joined: Fri Jul 10, 2020 7:04 pm

Anyone got any experience with breadmakers? Want to get the missus one. Are they any good?
Dont want to go crazy on budget. 150 euros or so.
Dogbert
Posts: 703
Joined: Sun Jul 12, 2020 7:32 am

Mr Tim Buktoo wrote: Mon Sep 27, 2021 3:49 pm Anyone got any experience with breadmakers? Want to get the missus one. Are they any good?
Dont want to go crazy on budget. 150 euros or so.
Honestly don't bother , It will get chucked into the cupboard of unused kitchen appliances with 6 months , may to reappear at Xmas ( maybe)

If you want to make bread - do it by hand - much more satisfying

If you ( your wife ) want to make bread , by a book for 20 Euros , and spend the other 130 on some decent wine
Lager & Lime - we don't do cocktails
Dogbert
Posts: 703
Joined: Sun Jul 12, 2020 7:32 am

Dogbert wrote: Mon Sep 27, 2021 3:55 pm
Mr Tim Buktoo wrote: Mon Sep 27, 2021 3:49 pm Anyone got any experience with breadmakers? Want to get the missus one. Are they any good?
Dont want to go crazy on budget. 150 euros or so.
Honestly don't bother , It will get chucked into the cupboard of unused kitchen appliances within 6 months , may to reappear at Xmas ( maybe)

If you want to make bread - do it by hand - much more satisfying

If you ( your wife ) want to make bread , by a book for 20 Euros , and spend the other 130 on some decent wine
Lager & Lime - we don't do cocktails
Mr Tim Buktoo
Posts: 112
Joined: Fri Jul 10, 2020 7:04 pm

Dogbert wrote: Mon Sep 27, 2021 3:55 pm
Mr Tim Buktoo wrote: Mon Sep 27, 2021 3:49 pm Anyone got any experience with breadmakers? Want to get the missus one. Are they any good?
Dont want to go crazy on budget. 150 euros or so.
Honestly don't bother , It will get chucked into the cupboard of unused kitchen appliances with 6 months , may to reappear at Xmas ( maybe)

If you want to make bread - do it by hand - much more satisfying

If you ( your wife ) want to make bread , by a book for 20 Euros , and spend the other 130 on some decent wine
Yeah she is well able to bake and does it often enough. Just handy to have one when feeling too lazy for it! She was about to bake some at the weekend but was too tired so started giving out to me about not buying her a breadmaker instead of stupid trinkets for her recent birthday! Cant win i tells ya.
User avatar
ASMO
Posts: 5423
Joined: Mon Jun 29, 2020 6:08 pm

Dinsdale Piranha wrote: Fri Aug 20, 2021 3:08 pm
inactionman wrote: Fri Aug 20, 2021 12:09 pm
Globus wrote: Fri Aug 20, 2021 12:05 pm Image
I've got the same chair, so much better than any other I've tried.

(for the tightwads amongst us, these go for well over a grand new but you can get ones from office clearance companies for about £300, we got my wife one during lockdown and it was brand new, still with labels. It's a Hemran Millar Aeron for anyone interested.)
Personally, I paid extra for the executive version.

Best chair I have had.
Bought myself a Secretlab Titan Evo gaming chair, the most comfortable office chair i have ever had.
turntable_2020_TTXL_pu_stealth_2-min.jpg
turntable_2020_TTXL_pu_stealth_2-min.jpg (82.05 KiB) Viewed 1434 times
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

Mr Tim Buktoo wrote: Mon Sep 27, 2021 4:06 pm
Dogbert wrote: Mon Sep 27, 2021 3:55 pm
Mr Tim Buktoo wrote: Mon Sep 27, 2021 3:49 pm Anyone got any experience with breadmakers? Want to get the missus one. Are they any good?
Dont want to go crazy on budget. 150 euros or so.
Honestly don't bother , It will get chucked into the cupboard of unused kitchen appliances with 6 months , may to reappear at Xmas ( maybe)

If you want to make bread - do it by hand - much more satisfying

If you ( your wife ) want to make bread , by a book for 20 Euros , and spend the other 130 on some decent wine
Yeah she is well able to bake and does it often enough. Just handy to have one when feeling too lazy for it! She was about to bake some at the weekend but was too tired so started giving out to me about not buying her a breadmaker instead of stupid trinkets for her recent birthday! Cant win i tells ya.
We've got a breadmaker and a food mixer (one of the big Kenwood Kmix ones) and the breadmaker generally sits in the cupboard but we use the kmix quite regularly. Although there's more steps to it, it's pretty easy to hoy the ingredients into the mixer, roll it out on some parchment and put in oven. You can do more varied styles and sizes as well - the misuss is dab hand at soda bread.

The breadmakers are limited to a pretty small loaf, and our one doesn't have a retractable mixer/paddle so you have to go digging into the loaf to extract or completely forget and blunt your breadknife on it..

It's admittedly handy to be able to set a timer so there's a fresh loaf in the morning - although you might have a timer on oven you could use for same purpose. It's also easy to just clean one baking tin/paddle, it's not exactly tricky to clean up after the mixer/baking tray but it's usually a bit messier with flour for rolling etc.

One issue is that sometimes the bread just doesn't 'work' in the breadmaker and its not clear why, thought it might be dead yeast but not entirely sure. Pre-bought packets always worked well though.

Our breadmaker is a Panasonic, bought about 10 years ago so sure there's a more recent version. Scored well in all reviews and we've found it OK - it's just a bit redundant at the minute.

Image

mixer is the kmix:

Image

It's pretty pricey (around £250-£300) so the smaller prospero might be an option, goes for around £100-£150.

Image
Mr Tim Buktoo
Posts: 112
Joined: Fri Jul 10, 2020 7:04 pm

Thanks for the detalied reply there.
Yeah we have a decent mixer too which gets used for cakes/sponges etc.
Think i might go with the Morphy Richards Homebake Breadmaker. (cant seem to post pics on here)
Seems to be in all the review lists at the midrange level.
Line6 HXFX
Posts: 1148
Joined: Sat Jul 04, 2020 9:31 am

Just bought the Seagull 1963 mechanical chronograph.
Beautiful thing, with the superb ST19 mechanical column wheel movement.
Every watch collector should have one. A mechanical chronograph with this type of movement for under 1000 quid is unheard of and it makes this watch an anomaly.

Ps)don't start fucking watch collecting.


User avatar
assfly
Posts: 4507
Joined: Thu Jul 02, 2020 6:30 am

inactionman wrote: Mon Sep 27, 2021 10:33 am The Defender I had eyes on looked too much work so that's been binned, but will keep eyes peeled.

As some recompense, the missus signed off on a trail camera we can use for the hedgehog house we just built for the kids.

The hedgehog house itself is a simple wood and slatted roof cheapie from Dobbies, I nailed some boards underneath to give it a base and used bricks to make a tunnel to keep foxes etc away from the entrance.

The trail camera looks a decent bit of kit, can't wait to give it a go - bought it from naturespy, a non-profit who do loads of this stuff around the world.

Image

https://shop.naturespy.org/product/brow ... tc-7e-hp4/
Great buy. I borrowed one from my mate when I went camping a few months back. Managed to capture an elephant checking out our car whilst we slept in our tent a few meters away. Lots of outdoor fun to be had!
weegie01
Posts: 1003
Joined: Mon Jun 29, 2020 10:34 pm

clydecloggie wrote: Fri Aug 20, 2021 10:37 am
Wylie Coyote wrote: Fri Aug 20, 2021 9:52 am
clydecloggie wrote: Thu Aug 19, 2021 9:40 am

I was just going to say...why not go for a '90s Land Cruiser instead for the exact same feel without the bankruptcy?
They are extremely rare in the UK, I think I see one on Autotrader for instance. IIRC Most Toyota Landcruisers in the UK aren't real Landcruisers like you get in Australia, they're rebadged Toyota Prados. Ultimately a 20 year car of any brand is going to require regular maintenance.
Once you get up to the Pecuniocratic United Estates of Grouse Shooting (or what Visit Scotland unimaginatively calls the 'Highlands'), there are plenty old Cruisers on show. Still dwarfed by the numbers of broken-dwon Land Rovers of course...
At least half of our friends and acquaintances own farms and estates. I can' think of any with a Toyota other than a modern pickup, nor can I think of anyone in the area with one. There used to be Landcruisers, Isuzus etc about. They are all gone but the Landies soldier on.
User avatar
Calculon
Posts: 1779
Joined: Mon Jun 29, 2020 7:25 pm

weegie01 wrote: Thu Oct 07, 2021 12:39 pm
clydecloggie wrote: Fri Aug 20, 2021 10:37 am
Wylie Coyote wrote: Fri Aug 20, 2021 9:52 am

They are extremely rare in the UK, I think I see one on Autotrader for instance. IIRC Most Toyota Landcruisers in the UK aren't real Landcruisers like you get in Australia, they're rebadged Toyota Prados. Ultimately a 20 year car of any brand is going to require regular maintenance.
Once you get up to the Pecuniocratic United Estates of Grouse Shooting (or what Visit Scotland unimaginatively calls the 'Highlands'), there are plenty old Cruisers on show. Still dwarfed by the numbers of broken-dwon Land Rovers of course...
At least half of our friends and acquaintances own farms and estates. I can' think of any with a Toyota other than a modern pickup, nor can I think of anyone in the area with one. There used to be Landcruisers, Isuzus etc about. They are all gone but the Landies soldier on.
Here in SA the Toyota Hilux seems to be the go to vehicle for farmers. Lots of Land Rover Defenders about but they're used by suburbanites for... whatever.
User avatar
FalseBayFC
Posts: 3554
Joined: Sun Aug 30, 2020 3:19 pm

After years of scoffing at the brand I finally relented and bought a couple of Le Creuset casseroles. I've used a plain cast iron Dutch oven and skillet for ever but felt like a change.

They are great pots I have to say. I've been trying my hand at classic French stuff and the white enamel really helps with guaging sauce colour etc.

There's a YT channel called French Cooking Academy and the chap gets into the Escoffier techniques. His endorsement finally tipped me towards getting them. First time I've been hooked by YT product placement
inactionman
Posts: 3065
Joined: Tue Jun 30, 2020 7:37 am

assfly wrote: Wed Oct 06, 2021 5:51 am
inactionman wrote: Mon Sep 27, 2021 10:33 am The Defender I had eyes on looked too much work so that's been binned, but will keep eyes peeled.

As some recompense, the missus signed off on a trail camera we can use for the hedgehog house we just built for the kids.

The hedgehog house itself is a simple wood and slatted roof cheapie from Dobbies, I nailed some boards underneath to give it a base and used bricks to make a tunnel to keep foxes etc away from the entrance.

The trail camera looks a decent bit of kit, can't wait to give it a go - bought it from naturespy, a non-profit who do loads of this stuff around the world.

Image

https://shop.naturespy.org/product/brow ... tc-7e-hp4/
Great buy. I borrowed one from my mate when I went camping a few months back. Managed to capture an elephant checking out our car whilst we slept in our tent a few meters away. Lots of outdoor fun to be had!
I was feeling quite proud of my photos of a fox but feel I've been trumped a bit now.

I've got a David Yarrow print on my wall where he uses remote controlled cameras to capture wildlife - in the print I've got, a Lioness - and I reckon these sorts of cameras are tailor-made for Africa.

The cheeky fox was eating the cat food we'd left out for the hedgehogs. Which really should have been expected. We get a few cats as well, the golf course opposite has deer but I'm not leaving my trail cam out for the local neds to pilfer (although I think they're generally put off by the IR glow)
Post Reply